Loading...

Nacera Pearl Multi Shade, Multi-layered Zirconia Blanks

SKU: nacera.pearl.ms Categories: , , ,

£132.80£191.40 excl. VAT+Carg.

DoCeram’s new Nacera Pearl Multi-Shade
Multilayering Zirconia Oxide, creating full contour crowns
Milling blanks, ø98.3 x 14mm, 18mm, or 22mm – each

Multi-Shade A Top Vita A1
Multi-Shade A Middle Vita A2
Multi-Shade A Bottom Vita A3
Multi-Shade B Top Vita shade B1
Multi-Shade B Middle Vita shade B2
Multi-Shade B Bottom Vita shade B3
Multi-Shade C Top Vita shade C1
Multi-Shade C Middle Vita shade C2
Multi-Shade C Bottom Vita shade C3
Multi-Shade D Top Vita shade D1
Multi-Shade D Middle Vita shade D2
Multi-Shade D Bottom Vita shade D3

Photo showing smooth, invisible transitions for restorations

Call for availability:
+44 1689 881788
Loading...

Description

Doceram, Nacera® Pearl Multi-Shade of highly translucent zirconium dioxide. A New ergonomic multi-layered system.
After sintering, Multi-Shade blanks replicate the smooth transition of colors you can observe in real teeth, thereby full contour as well as substructures constructions with a natural appearance.
To achieve most common tooth colors, Nacera® Pearl Multi-Shade blanks are available in the Vita shades A, B, C, and D. Their application is quite simple: Depending on the height positioning, for example, the colors A3, A2 or A1 can be attained in an A-blank. The same is true for the other shades. The structural height of 18 mm ensures that sufficient space for vertical
shifting is available. Thus, you receive an efficient and ergonomic multi-layered system, which covers almost all Vita classic shades with only four different blanks. Finished with a stain-and-glazing technique or using minimal stratification
by Cut-Back, Nacera® Pearl is always a reliable quality foundation formonolithic constructions, that meet the highest requirements for natural aesthetics.

Advantages: Highly translucent multi-layered system; Natural and smooth transitions from cervical to incisal; Extremely efficient: one blank covers three shades; Quick and economical for natural-looking monolithic restorations; Flexural strength (biaxial): 1400 MPa; Excellent Machinability: Thin margins can be milled without having to worry about chipping or cracks; Lifetime of milling burs increases up to 15 %

Physical properties* Nacera® Pearl Multi-Shade: Material ZrO2 Y-TZP; Color weiß transluzent; Density > 6,04 g/cm3; Flexural strength (biaxial) 1400 MPa; Compressive strength 3000 MPA; Modulus of elasticity 205 GPa; Impact Resistance 8 MPa m1/2; Vickers Hardness 1300 HV 0,5; Thermal expansion 10 10-6 k-1; Thermal conductivity 2 W/mK; Mean linear intercept < 0,4 mm; Radioactivity < 0,02 Bq/g; Solubility < 10 mg/cm2; Composition ZrO2 + HfO2 + Y2 O3 > 99%, Y2 O3 4,5%- 6%
* These properties were measured on test samples. The values are typical material properties and may vary according to product configuration, geometry and manufacturing process.

Additional information

Multi-Shade

A, B, C, D

Size

14mm, 18mm, 22mm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.