VITA VMK Master® OPAQUE – for masking the substructure material
Three variations are available for the application of the wash opaque (sold separately) or opaque materials: – Powder, sold separately: the opaque powder is mixed with the VITA opaque fluid (sold separately) and applied to the clean and dry substructure using a brush or glass instrument. – Pastes: The paste opaque 3D MASTER shades or classical shades(sold separately) is supplied in a ready-to-use consistency and can also be applied using a brush or glass instrument.
Application of the opaque: On the substructure that has been pre-treated and oxidized in accordance with the parameters given by the alloy manufacturer. After cleaning, the substructures must not be picked up with the fingers but with clean tweezers or clips. Wash bake: A thin coat of paste opaque must be brushed on the surface of the substructure and an extended pre-drying time is required for drying the paste. Alternatively, the mixed opaque powder (sold separately) can be applied thinly and evenly (semi-masking) on the bridge substructure or sprayed on thinly using the VITA SPRAY-ON technique. Don’t apply a first layer too thick.